M10 x 1.5 Thin Wall Key Insert - 2 Pack
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Package Quantity: 2
Package Weight: 0.1 lbs
Item: 85197
- Provides high strength and reliability. Provides maximum pullout strength. Breaks Grade 8 bolts in test after test.
- May be used in virtually any material - aluminum, magnesium, cast iron, cold rolled steel, and plastic.
- Installed with standard drills and taps.
- No pre-winder tool required
- Impossible to cross thread while installing.
- No tang break off.
- Positive mechanical lock against rotation.
- No special skills required. Installation procedures can be learned in minutes.
- Easy to remove if necessary.
- Repair worn hole.
- For use in applications where wall thickness is critical.
- Typical application - engine work in cylinder water jacket area.
| Brand: | Kimball Midwest Approved Vendor |
| Color: | Gray |
| Diameter: | M10 |
| Drill Size: | 1/2" |
| Finish: | Black Phosphate |
| Length: | 0.551" |
| Material: | Carbon Steel |
| Measurement Type: | Metric |
| Private Label: | No |
| Short Description: | Regular Pitch (Coarse Thread) |
| Tap Size: | M14x1.5 |
| Thread Pitch: | 1.5 |
| Thread Type: | Coarse |
- Provides high strength and reliability. Provides maximum pullout strength. Breaks Grade 8 bolts in test after test.
- May be used in virtually any material - aluminum, magnesium, cast iron, cold rolled steel, and plastic.
- Installed with standard drills and taps.
- No pre-winder tool required
- Impossible to cross thread while installing.
- No tang break off.
- Positive mechanical lock against rotation.
- No special skills required. Installation procedures can be learned in minutes.
- Easy to remove if necessary.
- Repair worn hole.
- For use in applications where wall thickness is critical.
- Typical application - engine work in cylinder water jacket area.
| Brand: | Kimball Midwest Approved Vendor |
| Color: | Gray |
| Diameter: | M10 |
| Drill Size: | 1/2" |
| Finish: | Black Phosphate |
| Length: | 0.551" |
| Material: | Carbon Steel |
| Measurement Type: | Metric |
| Private Label: | No |
| Short Description: | Regular Pitch (Coarse Thread) |
| Tap Size: | M14x1.5 |
| Thread Pitch: | 1.5 |
| Thread Type: | Coarse |
Digital Catalog
View Catalog