K100 with K280 Hose & Fittings Small Shop Setup

This Shop Setup contains a crimper, dies, 2 assortments and all required storage equipment.

K100AH - K100 K-Series Hydraulic Portable Crimper with Air/Hydraulic Pump - Qty. 1

• K100 CRIMPER - 35 Tons of crimping force.
• HOSE CAPACITY - Up to 1" 2-wire and 3/4" 4-spiral hose.
• OPEN DESIGN - Provides excellent operator visibility.
• MICROMETER - Fully adjustable micrometer allows for a precise crimp.
• LED CRIMP INDICATOR - Illuminates when the pusher reaches the optimum stop position to help prevent over crimping.
• REMOVABLE PUSHER & DIE CAGES - Makes it easy to accurately place fittings in the die.
• BASE MOUNTING HOLES - Allows the crimper to be bench or truck bed mounted.
• EASY CARRY HANDLE - Allows the crimper to be carried to almost any location where service is required.
• COMPARE TO WEATHERHEAD ET1000® MACHINE
• MADE IN THE U.S.A.

NOTE: Weatherhead® is a registered trademark of Eaton.

Dies ordered separately.

K100-16 - 16mm Orange K-Series Die - Qty. 1

K100-19 - 19mm Green K-Series Die - Qty 1

K100-23 - 23mm Blue K-Series Die - Qty. 1

• For use with the K100 and K300 Series Hydraulic Crimpers

K100DD - Die Storage Drawer - Qty. 1

• CONVENIENT STORAGE - Protects and holds crimper tooling for easy access.
  Divided compartments store up to six dies for K100 and K300 hydraulic crimpers. The additional side compartment can be used to store other crimper accessories.
• SPACE-SAVING DESIGN - Crimper can be mounted directly to the top of the drawer, using the pre-drilled holes, saving space on work benches.
• HEAVY-DUTY CONSTRUCTION - 11 gauge powder-coated mild steel is tough and durable for long service life.
  Corners are welded and ground smooth.
• MADE IN THE U.S.A.

KKFLUID - ISO 46 Hydraulic Fluid - 16 oz.

• BIODEGRADEABLE - Helps prevent contamination of the environment.
• SPECIFICATIONS:
  ISO Viscosity Grade: 46
  SAE Grade: 20W
  Oil Base: Synthetic
  Max Operating Temp: 200°F
  Flash Point: 442°F
  Color: Yellow

KKHOSE - 6' Extended Reach Hose for K-Series Crimpers - Qty. 1

• SIX FOOT EXTENDED REACH HOSE - Allows use of the K-Series Hydraulic Crimper actuator as a foot pedal.
• SPECIFICATIONS:
  3/8" high pressure jack hose
  3/8" male NPT hose ends

Note: Requires additional hydraulic fluid [K-M No. KKFLUID]

40-579-31 - 1/4" - 1/2" Kim-Krimp Pipe, JIC 37° & Face Seal Z Series Assortment - 62 Pieces

40-599-11 - 1/4"-1/2" K280 Hydraulic Hose Cabinet Assortment - 4 Pieces

630B - Bin Base - Qty. 1

Use with all Kimball Midwest Bins (K-M No.'s 612, 618, 619, 630, 631, 660, 661 and 662)

636B - Hydraulic Hose Cabinet Stand - Qty. 1

• Adjustable Base Stand - Closed - 35-3/4" Wide x 24-1/2" Deep
  Open - 61-1/8" Wide x 24-1/2" Deep

SPF9968 - Orange Bin Tape - 150 Feet

SPF9960 - Green Bin Tape - 150 Feet

SPF9967 - Blue Bin Tape - 150 Feet