• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

Assortment Contains:

• 640 - 24 Compartment Drawer - Qty. 1
• C5255X10 - 5/8" x 1/2" Female SAE JIC 37° Connector - Qty. 1
• C5255X12 - 3/4" x 3/4" Female SAE JIC 37° Connector - Qty. 1
• C5255X4 - 1/4" x 1/8" Female SAE JIC 37° Connector - Qty. 3
• C5255X4X4 - 1/4" x 1/4" Female SAE JIC 37° Connector - Qty. 2
• C5255X5 - 5/16" x 1/8" Female SAE JIC 37° Connector - Qty. 2
• C5255X6 - 3/8" x 1/4" Female SAE JIC 37° Connector - Qty. 2
• C5255X6X6 - 3/8" x 3/8" Female SAE JIC 37° Connector - Qty. 2
• C5255X8 - 1/2" x 3/8" Female SAE JIC 37° Connector - Qty. 2
• C5255X8X8 - 1/2" x 1/2" Female SAE JIC 37° Connector - Qty. 1
• C5355X10 - 5/8" x 1/2" Male SAE JIC 37° 45° Elbow - Qty. 1
• C5355X12 - 3/4" x 3/4" Male SAE JIC 37° 45° Elbow - Qty. 1
• C5355X12X8 - 3/4" x 1/2" Male SAE JIC 37° 45° Elbow - Qty. 1
• C5355X4 - 1/4" x 1/8" Male SAE JIC 37° 45° Elbow - Qty. 2
• C5355X4X4 - 1/4" x 1/4" Male SAE JIC 37° 45° Elbow - Qty. 2
• C5355X5 - 5/16" x 1/8" Male SAE JIC 37° 45° Elbow - Qty. 2
• C5355X6 - 3/8" x 1/4" Male SAE JIC 37° 45° Elbow - Qty. 2
• C5355X6X6 - 3/8" x 3/8" Male SAE JIC 37° 45° Elbow - Qty. 2
• C5355X8 - 1/2" x 3/8" Male SAE JIC 37° 45° Elbow - Qty. 1
• C5355X8X8 - 1/2" x 1/2" Male SAE JIC 37° 45° Elbow - Qty. 1