Thin Wall Key Insert Assortment (#10 - 1/2)

Coarse Thread (USS) & Fine Thread (SAE)

Package Quantity: 1

Package Weight: 8.7 lbs

Item: 40854

To place an order, please login or register.

Provides high strength and reliability. Provides maximum pullout strength. Breaks Grade 8 bolts in test after test.
May be used in virtually any material - aluminum, magnesium, cast iron, cold rolled steel, and plastic.
Installed with standard drills and taps.
No pre-winder tool required
Impossible to cross thread while installing.
No tang break off.
Positive mechanical lock against rotation.
No special skills required. Installation procedures can be learned in minutes.
Easy to remove if necessary.
Repair worn hole.
For use in applications where wall thickness is critical.
Typical application - engine work in cylinder water jacket area.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Provides high strength and reliability. Provides maximum pullout strength. Breaks Grade 8 bolts in test after test.
May be used in virtually any material - aluminum, magnesium, cast iron, cold rolled steel, and plastic.
Installed with standard drills and taps.
No pre-winder tool required
Impossible to cross thread while installing.
No tang break off.
Positive mechanical lock against rotation.
No special skills required. Installation procedures can be learned in minutes.
Easy to remove if necessary.
Repair worn hole.
For use in applications where wall thickness is critical.
Typical application - engine work in cylinder water jacket area.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov