• Provides high strength and reliability. Provides maximum pullout strength. Breaks Grade 8 bolts in test after test.
• May be used in virtually any material - aluminum, magnesium, cast iron, cold rolled steel, and plastic.
• Installed with standard drills and taps.
• No pre-winder tool required
• Impossible to cross thread while installing.
• No tang break off.
• Positive mechanical lock against rotation.
• No special skills required. Installation procedures can be learned in minutes.
• Easy to remove if necessary.
• Repair worn hole.
• For use in applications where wall thickness is critical.
• Typical application - engine work in cylinder water jacket area.

Assortment Contains:

• 675 - 16 Compartment Drawer - Qty. 1
• 85-090 - M5 Thin Wall Key Insert Installation Tool - Qty. 1
• 85-091 - M6 Thin Wall Key Insert Installation Tool - Qty. 1
• 85-093 - M8 Thin Wall Key Insert Installation Tool - Qty. 1
• 85-094 - M10 Thin Wall Key Insert Installation Tool - Qty. 1
• 85-095 - M12 Thin Wall Key Insert Installation Tool - Qty. 1
• 85-191 - M5 x 0.8 Thin Wall Key Insert - Qty. 3
• 85-192 - M6 x 1.0 Thin Wall Key Insert - Qty. 3
• 85-194 - M8 x 1.0 Thin Wall Key Insert - Qty. 3
• 85-195 - M8 x 1.25 Thin Wall Key Insert - Qty. 3
• 85-196 - M10 x 1.25 Thin Wall Key Insert - Qty. 2
• 85-197 - M10 x 1.5 Thin Wall Key Insert - Qty. 2
• 85-198 - M12 x 1.25 Thin Wall Key Insert - Qty. 2
• 85-199 - M12 x 1.75 Thin Wall Key Insert - Qty. 2