• Self-Tapping
  Chrome vanadium inserts install quickly into a drilled hole with a nut and bolt, no need for taps and install tools. Can be installed with wrenches, sockets or imapact tools
• Repair or Add Threads
  Use inserts to repair damaged threadsor add new threads to an assembly or part
• Stackable
  Multiple I-Tap™ inserts can be stacked and installed at the same time when additional thread length is needed.
• Self-Locking
  Locks in place without adhesive or threadlocker. Use cutting oil to install.
• Applications
  For use in cast iron, carbon steel, stainless steel, aluminum, hard plastics and more.

Installation

• Drill hole to size specified for insert.
• Thread a hex nut half way onta a cap screw the same size as the internal threads of the insert.
• Thread the insert onto the cap screw until the end of the cap screw is just above the cutting holes; seat the nut firmly against the top of the insert.
• Put the end of the insert in the drilled hole and hold perpendiuclar. Using a wrench on the nut, turn smoothly while pressing firmly downward until the insert is flush with the surface of the base material.
• Back the cap screw out of the insert and installation is complete

This Assortment Contains:

• 668 - 12 Compartment Drawer - Qty. 1
• 85-704 - 1/4"-20 I-Tap™ Thread Insert - Qty. 10
• 85-705 - 5/16"-18 I-Tap™ Thread Insert - Qty. 5
• 85-706 - 3/8"-16 I-Tap™ Thread Insert - Qty. 1
• 85-707 - 7/16"-14 I-Tap™ Thread Insert - Qty. 5
• 85-708 - 1/2"-13 I-Tap™ Thread Insert - Qty. 1
• 85-709 - 5/8"-11 I-Tap™ Thread Insert - Qty. 1