3/4-10 x 2" Shouldered Machinery Eyebolt
Heat Treated 1035 Steel Plain Finish
Package Quantity: 1
Package Weight: 1 lbs
Item: 419107
To place an order, please login or register.
- Shouldered neck provides additional strength to eliminate neck breakage.
- 1035 steel - heat treated.
- Self - colored.
- Conforms to ANSI B18.15.
- MADE IN THE U.S.A.
WARNING: Loading must never be made at an angle greater than 45° from bolt center line or rating capacity is drastically reduced. At a 45° load angle the working load limit should be reduced to 1/4 of the limit.
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | 3/4" |
| Finish: | Plain |
| Inside Diameter: | 1-1/2" |
| Material: | 1035 Carbon Steel |
| Private Label: | No |
| Rated Capacity: | 5,000 |
| Shank Length: | 2" |
| Thread Pitch: | 10 |
| Thread Type: | Coarse (USS) |
- Shouldered neck provides additional strength to eliminate neck breakage.
- 1035 steel - heat treated.
- Self - colored.
- Conforms to ANSI B18.15.
- MADE IN THE U.S.A.
WARNING: Loading must never be made at an angle greater than 45° from bolt center line or rating capacity is drastically reduced. At a 45° load angle the working load limit should be reduced to 1/4 of the limit.
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | 3/4" |
| Finish: | Plain |
| Inside Diameter: | 1-1/2" |
| Length: | N/A |
| Material: | 1035 Carbon Steel |
| Outside Diameter: | N/A |
| Private Label: | No |
| Rated Capacity: | 5,000 |
| Shank Length: | 2" |
| Thread Length: | N/A |
| Thread Pitch: | 10 |
| Thread Type: | Coarse (USS) |
