Shouldered neck provides additional strength to eliminate neck breakage.
1035 steel - heat treated.
Self - colored.
Conforms to ANSI B18.15.
MADE IN THE U.S.A.
WARNING: Loading must never be made at an angle greater than 45° from bolt center line or rating capacity is drastically reduced. At a 45° load angle the working load limit should be reduced to 1/4 of the limit.
Product Specification
Brand:
Kimball Midwest Approved Vendor
Diameter:
7/8"
Eye ID:
1-11/16"
Finish:
Plain
Manufacturer Number:
15
Material:
1035 Steel
Measurement Type:
USS
Rated Capacity:
7,000 lbs
Shank Length:
2-1/4"
Subcategory:
Shouldered Machinery Eye Bolt
Thread Pitch:
9
Thread Size:
7/8"-9
Thread Type:
Coarse
Related Products
{"Name":"1/4\" x 1/8\" Male Pipe Rigid Hose End - Kim-Krimp Z Series - 4 Pack","SearchUid":"f98a38eb-130f-4267-97b5-d014df89d9a2","Code":"ZMP0402","RankingModifier":"Coveo ML Product Recommendation","Category":"Kim-Krimp Z Series Hose Ends","Brand":"Kim-Krimp","RecommendationStrategy":"frequent bought"}
{"Name":"Silver-Streak Fine Line Metal Marker","SearchUid":"f98a38eb-130f-4267-97b5-d014df89d9a2","Code":"831947","RankingModifier":"Coveo ML Product Recommendation","Category":"Specialty Markers","Brand":"Kimball Midwest Approved Vendor","RecommendationStrategy":"frequent bought"}
{"Name":"1/4\" x 1/8\" Male Pipe Rigid Hose End - Kim-Krimp Z Series - 4 Pack","SearchUid":"f98a38eb-130f-4267-97b5-d014df89d9a2","Code":"ZMP0402","RankingModifier":"Coveo ML Product Recommendation","Category":"Kim-Krimp Z Series Hose Ends","Brand":"Kim-Krimp","RecommendationStrategy":"frequent bought"}
{"Name":"Silver-Streak Fine Line Metal Marker","SearchUid":"f98a38eb-130f-4267-97b5-d014df89d9a2","Code":"831947","RankingModifier":"Coveo ML Product Recommendation","Category":"Specialty Markers","Brand":"Kimball Midwest Approved Vendor","RecommendationStrategy":"frequent bought"}