1/2 x #10-24 Screw Toggler Bolt
Use 1/2 Drill
Package Quantity: 25
Package Weight: 0.9 lbs
Item: 482991
To place an order, please login or register.
- Installs in seconds.
- Requires only a small hole for 1/2" hole for 1/4" toggle bolt.
- Requires a shorter bolt than wing toggles.
- Stays in place without bolt.
- Will not spin during installation.
- Will not fall behind the wall when screw is removed.
- Totally reliable.
- Minimum clearance behind wall is 1-7/8".
- For wall thickness 3/8" to 3-5/8".
- MADE IN THE U.S.A.
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | #10 |
| Finish: | Zinc Plated |
| Hole Size: | 1/2" |
| Material: | Steel/Polystyrene/Polypropylene |
| Private Label: | No |
- Installs in seconds.
- Requires only a small hole for 1/2" hole for 1/4" toggle bolt.
- Requires a shorter bolt than wing toggles.
- Stays in place without bolt.
- Will not spin during installation.
- Will not fall behind the wall when screw is removed.
- Totally reliable.
- Minimum clearance behind wall is 1-7/8".
- For wall thickness 3/8" to 3-5/8".
- MADE IN THE U.S.A.
| # of Pieces: | N/A |
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | #10 |
| Drive Recess: | N/A |
| Finish: | Zinc Plated |
| Head Style: | N/A |
| Hole Size: | 1/2" |
| Length: | N/A |
| Material: | Steel/Polystyrene/Polypropylene |
| Private Label: | No |
