{"ecommerce":{"detail":{"actionField":{"list":"/488356"},"products":[{"id":"488356","name":"3/8 x 4\" Taper Bolt High Strength Anchor","brand":"Kimball Midwest","category":"3845_Expansion Shields","variant":"","price":"","quantity":10,"coupon":"","position":0}]}}}

3/8 x 4" Taper Bolt High Strength Anchor

  • HIGH STRENGTH - The highest tensile and shear strength of any expansion anchor.
  • GRADE 5 CONSTRUCTION - Heat treated for added shear strength.
  • EASY INSTALLATION - Hole size equals anchor diameter.
  • NON-CRITICAL HOLE SIZE - Oversize holes can be accommodated by turning the pre-expanded nut several times.
  • BOLTS MAY BE REMOVED AND REUSED - The bolt can be reused in another application with a new nut.
  • EQUIPMENT CAN BE MOVED AND REPLACED - The bolt can be re-inserted in the same hole and torqued to obtain its original holding power (on removal the nut stays in the hole).
  • HIGH VIBRATION RESISTANCE - Withstands vibratory loads better than any other expansion anchor.

NOTE: Not for use in brick or block.

Brand: Kimball Midwest Approved Vendor
Diameter: 3/8"
Finish: Zinc Plated
Grade: 5
Head Height: 3/16"
Head Style: Hex Head
Hole Size: 3/8"
Length: 4"
Material: Carbon Steel
Minimum Embedment: 1-7/8"
Private Label: No
Torque: 40
  • HIGH STRENGTH - The highest tensile and shear strength of any expansion anchor.
  • GRADE 5 CONSTRUCTION - Heat treated for added shear strength.
  • EASY INSTALLATION - Hole size equals anchor diameter.
  • NON-CRITICAL HOLE SIZE - Oversize holes can be accommodated by turning the pre-expanded nut several times.
  • BOLTS MAY BE REMOVED AND REUSED - The bolt can be reused in another application with a new nut.
  • EQUIPMENT CAN BE MOVED AND REPLACED - The bolt can be re-inserted in the same hole and torqued to obtain its original holding power (on removal the nut stays in the hole).
  • HIGH VIBRATION RESISTANCE - Withstands vibratory loads better than any other expansion anchor.

NOTE: Not for use in brick or block.

Brand: Kimball Midwest Approved Vendor
Diameter: 3/8"
Finish: Zinc Plated
Grade: 5
Head Height: 3/16"
Head Style: Hex Head
Hole Size: 3/8"
Length: 4"
Material: Carbon Steel
Minimum Embedment: 1-7/8"
Private Label: No
Thread Pitch: N/A
Thread Type: N/A
Torque: 40

Stay Connected

Facebook LinkedIn Twitter Instagram YouTube Blog