1/2 x 4" Taper Bolt High Strength Anchor
Grade 5 Zinc Plated
Package Quantity: 10
Package Weight: 2.6 lbs
Item: 488358
To place an order, please login or register.
- HIGH STRENGTH - The highest tensile and shear strength of any expansion anchor.
- GRADE 5 CONSTRUCTION - Heat treated for added shear strength.
- EASY INSTALLATION - Hole size equals anchor diameter.
- NON-CRITICAL HOLE SIZE - Oversize holes can be accommodated by turning the pre-expanded nut several times.
- BOLTS MAY BE REMOVED AND REUSED - The bolt can be reused in another application with a new nut.
- EQUIPMENT CAN BE MOVED AND REPLACED - The bolt can be re-inserted in the same hole and torqued to obtain its original holding power (on removal the nut stays in the hole).
- HIGH VIBRATION RESISTANCE - Withstands vibratory loads better than any other expansion anchor.
NOTE: Not for use in brick or block.
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | 1/2" |
| Finish: | Zinc Plated |
| Grade: | 5 |
| Head Height: | 1/4" |
| Head Style: | Hex Head |
| Hole Size: | 1/2" |
| Length: | 4" |
| Material: | Carbon Steel |
| Minimum Embedment: | 2-3/8" |
| Private Label: | No |
| Torque: | 90 |
- HIGH STRENGTH - The highest tensile and shear strength of any expansion anchor.
- GRADE 5 CONSTRUCTION - Heat treated for added shear strength.
- EASY INSTALLATION - Hole size equals anchor diameter.
- NON-CRITICAL HOLE SIZE - Oversize holes can be accommodated by turning the pre-expanded nut several times.
- BOLTS MAY BE REMOVED AND REUSED - The bolt can be reused in another application with a new nut.
- EQUIPMENT CAN BE MOVED AND REPLACED - The bolt can be re-inserted in the same hole and torqued to obtain its original holding power (on removal the nut stays in the hole).
- HIGH VIBRATION RESISTANCE - Withstands vibratory loads better than any other expansion anchor.
NOTE: Not for use in brick or block.
| Brand: | Kimball Midwest Approved Vendor |
| Diameter: | 1/2" |
| Finish: | Zinc Plated |
| Grade: | 5 |
| Head Height: | 1/4" |
| Head Style: | Hex Head |
| Hole Size: | 1/2" |
| Length: | 4" |
| Material: | Carbon Steel |
| Minimum Embedment: | 2-3/8" |
| Private Label: | No |
| Thread Pitch: | N/A |
| Thread Type: | N/A |
| Torque: | 90 |
