["{\"event\":\"detail\",\"ecommerce\":{\"detail\":{\"actionField\":{\"list\":\"/871018\"},\"products\":[{\"id\":\"871018\",\"name\":\"7\\\" x 5/8\\\"-11 60 Grit Type 29 Ultra-Max High Density Zirconia Grain Flap Disc\",\"brand\":\"Kimball Midwest\",\"category\":\"Flap Discs\",\"variant\":\"\",\"price\":\"Unpriced\",\"quantity\":1,\"coupon\":\"\",\"position\":0}]}}}","{\"currency\":\"USD\",\"value\":0.00,\"coupon\":\"\",\"payment_type\":\"\",\"shipping_tier\":\"\",\"items\":[{\"item_id\":\"871018\",\"item_name\":\"7\\\" x 5/8\\\"-11 60 Grit Type 29 Ultra-Max High Density Zirconia Grain Flap Disc\",\"coupon\":\"\",\"discount\":0.0,\"item_brand\":\"\",\"item_category\":\"Abrasives\",\"item_category2\":\"Abrasive Discs\",\"item_category3\":\"Flap Discs\",\"item_category4\":\"\",\"item_category5\":\"\",\"item_list_name\":\"ProductDisplayPage\",\"item_variant\":\"\",\"price\":0.0,\"quantity\":1,\"quantitypackage\":1}],\"event\":\"dle_viewItem\",\"clearObject\":[\"ecommerce\"]}"]

7" x 5/8"-11 60 Grit Type 29 Ultra-Max High Density Zirconia Grain Flap Disc

Price

Want to view pricing for this product?
Log In or Create Login

Not a Kimball Midwest Customer?
Register

Package Quantity: 1

Package Weight: 0.8 lbs

Item: 871018

ZIRCONIA ABRASIVE CLOTH.

  • Provides fast, aggressive cutting action. 

EXTREMELY LONG LIFE.

  • Lasts up to 25 times longer than aluminum oxide resin fiber discs.
  • No repeated stopping to change discs.
  • Layered flaps stay sharp until the disc is completely worn out.

CUTS AND FINISHES AT THE SAME TIME.

  • Use flapdiscs for both cutting and finishing at the same time.
  • No switching from type 27 grinding wheels to resin fiber discs and then back again.
  • The cushioning effect of the cloth allows a flap disc to provide high removal rate while giving the fine finish of resin fiber discs.

CONSISTENT FINISH.

  • Thick layers of Zirconia cloth are angled to suit the natural working angle of a grinder so more abrasive contacts the work surface.
  • As the layers slowly wear, more new abrasive is exposed – sharp and ready to go.
  • Consistent finish throughout the discs life.

EASIER USE.

  • Just apply light pressure and the disc will give the desired finish with virtually no vibration and low noise level.
  • The speed of the machine does the work without leaning on the grinder as is necessary with dull grinding discs.

 

  • Rough and medium grinding in one operation.
  • Conforms to inside angles, uneven surfaces and contours.
  • Deburring.
  • Rust removal.
  • Edge grinding.
  • Surface grinding.
  • Working fillet welds.
Arbor Hole Size: 5/8"-11
Brand: Ultra-Max
Color: Brown
Diameter: 7"
Grit: 60
Material: Zirconia
Maximum RPM: 8,600 RPM
Mount: Type 29
Subcategory: Type 29 Flap Disc
Item Number:  871018

SDS 7X5/8-11 60G ULTRAMAX


WARNING: Some dust created through the use of abrasive products can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

ZIRCONIA ABRASIVE CLOTH.

  • Provides fast, aggressive cutting action. 

EXTREMELY LONG LIFE.

  • Lasts up to 25 times longer than aluminum oxide resin fiber discs.
  • No repeated stopping to change discs.
  • Layered flaps stay sharp until the disc is completely worn out.

CUTS AND FINISHES AT THE SAME TIME.

  • Use flapdiscs for both cutting and finishing at the same time.
  • No switching from type 27 grinding wheels to resin fiber discs and then back again.
  • The cushioning effect of the cloth allows a flap disc to provide high removal rate while giving the fine finish of resin fiber discs.

CONSISTENT FINISH.

  • Thick layers of Zirconia cloth are angled to suit the natural working angle of a grinder so more abrasive contacts the work surface.
  • As the layers slowly wear, more new abrasive is exposed – sharp and ready to go.
  • Consistent finish throughout the discs life.

EASIER USE.

  • Just apply light pressure and the disc will give the desired finish with virtually no vibration and low noise level.
  • The speed of the machine does the work without leaning on the grinder as is necessary with dull grinding discs.

 

  • Rough and medium grinding in one operation.
  • Conforms to inside angles, uneven surfaces and contours.
  • Deburring.
  • Rust removal.
  • Edge grinding.
  • Surface grinding.
  • Working fillet welds.
Arbor Hole Size: 5/8"-11
Brand: Ultra-Max
Color: Brown
Diameter: 7"
Grit: 60
Material: Zirconia
Maximum RPM: 8,600 RPM
Mount: Type 29
Subcategory: Type 29 Flap Disc
Item Number:  871018

SDS  7X5/8-11 60G ULTRAMAX


WARNING: Some dust created through the use of abrasive products can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Stay Connected

Facebook LinkedIn Twitter Instagram YouTube Blog