4-1/2" x 7/8" 80 Grit Type 29 High Density Zirconia Ultra Flap Disc

ZIRCONIA ABRASIVE CLOTH.

• Provides fast, aggressive cutting action. 

EXTREMELY LONG LIFE.

• Lasts up to 25 times longer than aluminum oxide resin fiber discs.
• No repeated stopping to change discs.
• Layered flaps stay sharp until the disc is completely worn out.

CUTS AND FINISHES AT THE SAME TIME.

• Use flapdiscs for both cutting and finishing at the same time.
• No switching from type 27 grinding wheels to resin fiber discs and then back again.
• The cushioning effect of the cloth allows a flap disc to provide high removal rate while giving the fine finish of resin fiber discs.

CONSISTENT FINISH.

• Thick layers of Zirconia cloth are angled to suit the natural working angle of a grinder so more abrasive contacts the work surface.
• As the layers slowly wear, more new abrasive is exposed – sharp and ready to go.
• Consistent finish throughout the discs life.

EASIER USE.

• Just apply light pressure and the disc will give the desired finish with virtually no vibration and low noise level.
• The speed of the machine does the work without leaning on the grinder as is necessary with dull grinding discs.

• Rough and medium grinding in one operation.
• Conforms to inside angles, uneven surfaces and contours.
• Deburring.
• Rust removal.
• Edge grinding.
• Surface grinding.
• Working fillet welds.