• PRIMERLESS FORMULA - Allows use on aluminum, steel, plated fasteners, stainless steel and special alloys where other threadlockers fail.
• PERMANENT LOCKING - Locks and seals large fasteners up to 1" diameter where shock and vibration occur. May require heat to disassemble.
• COMPARE TO LOCTITE® 263™
• OIL TOLERANT - Performs where minor surface contamination from oil may be present.
  Eliminates the need for extensive cleaning of parts that have been in service.
• SPECIFICATIONS:
  Max Gap Fill: 0.007"
  Break Away Torque: 200 - 350 In/Lbs (On a 3/8 plated nut and bolt.)
  Temp. Rating: -60 to 360° F
  Fixture Time: 5 to 20 Minutes
  Full Cure Time: 24 Hours
  Meets Spec: ASTM D-5363: MIL-S-46163A
• MADE IN THE U.S.A.

NOTE: Not recommended for use in pure oxygen or oxygen rich environments.
Not recommended for use with plastics, especially thermoplastics.
263 is a trademark and Loctite® is a registered trademark of Henkel IP & Holding GMBH LLC, Germany.