Easily adds additional circuits without cutting or splicing. Provides both an extra circuit and fuse protection in one simple step. Turns one fuse slot into two while maintaining new car warranties without altering existing circuits. Safe for use with sophisticated on-board computer systems.

The ATO Fuse Holder is designed for use with all ATO and ATC fuses and is available in 20 Amp and 30 Amp maximum styles. It features two 4" wire leads for easy installation. Additionally, it includes a splashproof cap that protects fuses from water and corrosion, and the attached wire leads facilitate easy splicing into new or existing circuits. The specifications include a maximum voltage of 52VDC, a temperature rating ranging from -40°F to 185°F, an IP rating of IP65, a body made of PVC, and brass contacts.

ENVIRONMENTALLY SEALED with silicone rubber seals for moisture and fluid protection. Features EXTRA LONG WIRE LEADS at 10 inches, meeting Recreational Vehicle and U.S. Coast Guard Standards. Includes a MOUNTABLE HEAVY DUTY CAP with a nylon body that self latches and can be mounted using side anchor molding.

The ATM Mini-Fuse Holder features a compact size that allows for use almost anywhere and is available in 20 Amp and 30 Amp maximum styles, equipped with two 4-inch wire leads.

The in-line design fuse holders allow for fast and easy addition of a fuse in applications up to 32 VAC, featuring tough molded construction with a synthetic PVC body that resists weathering and corrosion. They accommodate ATO and ATC style fuses and come with 4" wire leads for quick splicing into existing or new circuits.

Easily add two additional circuits without cutting or splicing wire. Provides extra circuits and fuse protection while maintaining factory warranties. Safe in use, will not interfere with sophisticated onboard computer systems. Specifications include 16 AWG wire gauge, max 30 Amps for existing circuits, and max 20 Amps for add-on circuits.

The Maxi-Fuse Holder is designed for high amperage circuit protection and comes in two variations: one features two 5" 8 Ga. wire leads and is rated to 60 Amps at 32 volts, while the other includes two 6" 6 Ga. wire leads and is rated to 80 Amps at 32 volts.

Easily add additional circuits without cutting or splicing, providing extra circuit and fuse protection. Maintains warranties without altering existing circuits. Safe in use, will not interfere with on-board computer systems. Features a heat shrink terminal with Therma-Flow sealant to prevent corrosion-related failure.

Blo-N-Glo LED indicator fuse holders feature an LED that GLOWS WHEN IT BLOWS, signaling when a fuse needs replacing. Designed to USE STANDARD FUSES, these holders save time and labor by quickly identifying blown fuses, reducing downtime. They MEET OEM SPECIFICATIONS and REPLACE STANDARD FUSE HOLDER STYLES, available in ATM, ATO & Maxi.

In-line fuse holders are compact and allow use almost anywhere circuit protection is required, while protective covers enable use in harsh environments. Additionally, 14 gauge wire is available for various applications.

The product features glass tube in-line fuse holders, an 8" loop of 14 gauge wire, and a “Twist-Lock” design that allows for easy fuse removal. It is universal and fits SFE, AGC, AGW, or AGX fuses up to 20 amps.

Clear in-line fuse holders provide INSTANT VISIBILITY for quick identification of blown Blo-N-Glo fuses, reducing downtime in dimly lit areas. Weather resistant against moisture, salt spray, and engine compartment fluids. Specifications include ATO/ATC style with 32 Volt DC and 30 Amps, and ATM Mini style with 32 Volt DC and 20 Amps.

EASY ADD-ON FUSE HOLDER designed for quick installation without tools. Accommodates ATO Fuses up to 30 amps and fits wires from 12 to 18 gauge. Patented design ensures secure connections, allowing for removal and reinstallation. Fast installation in seconds by simply stripping wires and tightening the male ends.

Heavy duty 30 amp fuse holders designed for use with GM air conditioners and heater blower motors. Features include two 4" 12 gauge orange wire leads and an AGC 30 amp fuse included with each holder. Ideal for reliable performance in automotive applications.

The product features a maximum of 32 volts and 30 amps, utilizes wire ranging from 18 gauge to 12 gauge, boasts one piece molded construction, and accepts all 1/4x1-1/4 fuses, including AGC's and SFE-20.

The product features a tough nylon body with a mounting clip slot, and its open design ensures that moisture will not be trapped.

Requires no wire stripping, fast installation without wire damage, and installs with common pliers. Accommodates fuses up to 20 amps. Wire range: 18-14. Specifications include a maximum voltage of 32 volts, temperature of 105°C, and amp ratings of 20 amps for 14 AWG, 10 amps for 16 AWG, and 7.5 amps for 18 AWG.

Four gang ATO fuse holder with a single 10 gauge feed and four fused 12 gauge outputs (12" leads). Rated for 40 amps (4 circuits combined). Suitable for marine, motor homes, van conversions, ambulances, police and fire vehicles, public utility trucks, highway equipment, and heavy-duty trucking. Units can be locked together or ganged.

Available in 20 Amp and 30 Amp max styles, it features two 5" wire leads.

The product features a maximum of 32 volts and 30 amps, utilizes wire ranging from 18 gauge to 12 gauge, and has a snap together nylon housing. It is compatible with AGA, AGC, AGX, and SFE fuses ranging from 7-1/2 to 20 (1/4 x 7/8, 1", 1-1/4).

The fastest, easiest in-line fuse holder, designed for 12 to 18 gauge wire and fuses up to 30 amps. No tools required; no crimping, splicing, or taping needed. Accepts all 1/4 diameter glass tube fuses from 3/4" to 1-1/4" length, including AGC's, AGW's, AGX's, and SFE-6 thru SFE-20.

The product features glass tube in-line fuse holders, an 8" loop of 14 gauge wire, and a “Twist-Lock” design that allows for easy fuse removal. It is universal and fits SFE, AGC, AGW, or AGX fuses up to 20 amps.

Super compact design fits anywhere. Fast, easy installation with any standard terminal crimp tool. Fully insulated body requires no tape or heat shrink tubing. Heat stabilized body resists temperatures from -40° to 221°F. Accepts all ATM Mini-Fuses, ideal for all in-line connections.