Toggle & Rocker Switch Installation Parts

8 results

Full Cover Weatherproof Toggle Boot Seals

Durable rubber boot bonded to brass mounting nut for a positive seal. Fits toggle switches with standard 15/32-32 threaded stems. Protects against moisture, dirt, ice, and other problem conditions. Quickly converts switches for use in exposed areas. Full cover completely covers toggle handle.

		Item #	Diameter	Material	Package Qty
		28721	15/32"	Rubber	1	Log in to view price

Open End Weatherproof Toggle Boot Seals

Durable rubber boot bonded to brass mounting nut for a positive seal. Fits toggle switches with standard 15/32-32 threaded stems. Protects against moisture, dirt, ice, and other problem conditions. Open end design allows toggle handle to protrude, ideal for long handle switches. Perfect for exposed areas.

		Item #	Diameter	Material	Package Qty
		28720	15/32"	Rubber	1	Log in to view price

Toggle Switch Guards

Manual toggle switch lock-out prevents accidental actuation by securing the switch in the "Off" or "On" position until the cover is raised. Designed for safe operation in hazardous applications, featuring a spring-loaded cover that snaps into position. Keyed faceplate fits standard 15/32 diameter mounting stems, ensuring reliable functionality.

		Item #	Diameter	Material	Package Qty
		28722	15/32"	Steel	1	Log in to view price

Toggle Switch Face Plates

The product features embossed lettering "ON" and "OFF," a nickel finish, keyed for correct alignment, and is designed for switches with 15/32" stems.

		Item #	Diameter	Material	Package Qty
		28724	15/32"	Steel	10	Log in to view price

Pigtail for Round Rocker Switches

FOR USE WITH - 28-1900 and 28-1901.

		Item #	Name	Package Qty
		281910	Pigtail for Round Rocker Switch	1	Log in to view price

3-5 Rocker Switch Mounting Kits

Install switches when panel mounting isn't possible. The snap-together assembly holds three to five brackets and can be used for top of panel or under panel mounting. It features brass stabilizing rods for mounting four or five switches.

		Item #	Name	Package Qty
		281550	3 - 5 Rocker Switch Mounting Kit	1	Log in to view price

Rocker Switch End Section Brackets

For installing two or more snap-in mounting rocker switches in a panel, the dimensions are as follows: the two sections measure 2.37" (60.20mm) wide and 2.30" (58.42mm) high, while the mounting hole for two units is 2.02" (51.31mm) wide and 1.90" (48.26mm) high. Additionally, you should add 1.03" (26.16mm) for each additional unit.

		Item #	Name	Package Qty
		281551	Rocker Switch End Section Bracket	1	Log in to view price

Rocker Switch Middle Section Brackets

For installing two or more snap-in mounting rocker switches in a panel, the dimensions are as follows: the panel is two sections measuring 2.37" (60.20mm) wide and 2.30" (58.42mm) high. The mounting hole for two units is 2.02" (51.31mm) wide and 1.90" (48.26mm) high, with an additional 1.03" (26.16mm) required for each additional unit.