Miscellaneous Hose & Tubing Tools
Kinks, leaks, stuck fittings and spring clamps can turn a 10-minute hose job into half a day. We stock the oddball tools that get you back in control: bend, straighten, deburr, flare and gauge tubing, pinch off lines, service clamps in tight spots and pop instant-connects fast. Use angled release tools when access is ugly, straight tools when you have room.
Filter
21 results
Top
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Release Pro Quick Release Tool Set for Hose & Tubing
Release Pro quick release tool set for hose and tubing. Hardened steel jaws grip tubing while an opposing jaw pushes the fitting for one-handed, no-effort release. Tools handle a wide range of push-on fittings and help remove fuel filters, vacuum and water lines for repairs.
| Item # | Material | Package Qty | |||
|---|---|---|---|---|---|
|
|
841380
|
Hardened Steel
|
1
|
Log in to view price |
Release Pro Quick-Release Pliers for Hose & Tubing
Quick-release pliers for removing push-on and instant connect hose fittings. Steel construction with straight or 90° jaws sized for small and large tubing ranges. One-handed operation provides fast, safer disconnection for repair and maintenance.
| Item # | Range | Plier Type | Material | Package Qty | |||
|---|---|---|---|---|---|---|---|
|
|
841622
|
1/8" - 3/8"
|
Angle Nose
|
Steel
|
1
|
Log in to view price | |
|
|
841624
|
1/8" - 3/8"
|
Straight Jaw
|
Steel
|
1
|
Log in to view price | |
|
|
841623
|
3/8" - 5/8"
|
Angle Nose
|
Steel
|
1
|
Log in to view price | |
|
|
841625
|
3/8" - 3/4"
|
Straight Jaw
|
Steel
|
1
|
Log in to view price |
Flexible Hose Clamp Pliers
Flexible hose clamp pliers with a 24" flexible shaft for access in crowded engine bays. Ratcheting lock holds spring and wire hose clamps from 11/16" to 2-1/2" for secure installation or removal. Rubber handles provide a non-slip grip and improved control for repair tasks.
| Item # | Range | Length | Package Qty | |||
|---|---|---|---|---|---|---|
|
|
841403
|
11/16" - 2-1/2"
|
24"
|
1
|
Log in to view price |
90° Hose Pinch Pliers
Nylon 90° hose pinch pliers for pinching flexible fluid lines with smooth rounded jaws that help resist abrasion or puncture. Reinforced nylon construction resists rust and provides heat and electrical nonconductivity. A sliding locking gate helps secure the tool for repair and maintenance tasks.
| Item # | Range | Jaw Length | Length | Material | Package Qty | |||
|---|---|---|---|---|---|---|---|---|
|
|
842402
|
Up to 3/8" Tubing
|
5/8"
|
6-1/4"
|
Nylon
|
1
|
Log in to view price | |
|
|
842403
|
Up to 9/16" Tubing
|
5/8"
|
6-3/4"
|
Nylon
|
1
|
Log in to view price | |
|
|
842404
|
Up to 15/16" Tubing
|
1-1/2"
|
9"
|
Nylon
|
1
|
Log in to view price |
Kim-Connect Disconnect Tool
Kim-Connect disconnect tool for push-to-connect tubing connections. Composite construction with removable design for copper, CPVC and PEX and rated to 200 psi at 200 °F. Provides fast, tool-free installation and easy disassembly for maintenance and repairs.
| Item # | Name | Tube OD | Material | Package Qty | |||
|---|---|---|---|---|---|---|---|
|
|
93883
|
1" Kim-Connect Disconnect Tool - 2 Pack
|
1"
|
Composite
|
2
|
Log in to view price | |
|
|
93881
|
1/2" Kim-Connect Disconnect Tool - 2 Pack
|
1/2"
|
Composite
|
2
|
Log in to view price | |
|
|
93882
|
3/4" Kim-Connect Disconnect Tool - 2 Pack
|
3/4"
|
Composite
|
2
|
Log in to view price |
Master Disconnect Set
17-piece fitting disconnect kit for removing hose and tubing couplings on vehicles. Tools cover fuel, transmission, air conditioning, air brake and air suspension fittings and include a quick-reference index in a heavy-duty blow-molded storage case.
| Item # | Number of Pieces | Package Qty | |||
|---|---|---|---|---|---|
|
|
54844
|
17
|
1
|
Log in to view price |
1/4" - 1" Kim-Connect Deburring & Gauging Tool
Composite deburring and gauging tool for 1/4" to 1" tubing. Composite construction resists corrosion and withstands up to 200 psi and 200 °F. Provides quick, accurate deburring and sizing to improve fit and reduce installation time for plumbing and HVAC tasks.
| Item # | Material | Package Qty | |||
|---|---|---|---|---|---|
|
|
93885
|
Composite
|
1
|
Log in to view price |
Barb-Tite® End Assembly Tool
Barb-Tite® end assembly tool for installing push-on hose ends. Steel jaws and push rod with a black and silver finish provide secure positioning and fast, repeatable operation. Helps produce dependable, leak-proof hose assemblies for repairs and equipment maintenance.
| Item # | Name | Package Qty | |||
|---|---|---|---|---|---|
|
|
T101A
|
Barb-Tite® End Assembly Tool
|
1
|
Log in to view price |
Master Tool for Punch-Lok Band Clamps
Master tool for punch-lok band clamps made from alloy steel for durable installation of punch type hose clamps. Works with preformed, double-wrapped stainless band clamps and provides consistent, low-profile locking for secure hose connections and easier installation in equipment maintenance. Made in the U.S.A.
| Item # | Material | Package Qty | |||
|---|---|---|---|---|---|
|
|
50700
|
Alloy Steel
|
1
|
Log in to view price |
Standard Jaw Installation & Removal Tool
Standard jaw installation and removal tool for 2-ear hose clamp work. Zinc plated carbon steel band with one-piece jaw design provides a tamper-proof seal without damaging hose and clamps rubber, plastic tubing, coaxial cable and rope. Easy to apply and remove.
| Item # | Name | Package Qty | |||
|---|---|---|---|---|---|
|
|
50760
|
Standard Jaw Installation & Removal Tool
|
1
|
Log in to view price |
Double Flaring Tool
Double flaring tool for forming reliable double and single flares on soft copper, brass, or aluminum tubing. Carbon steel construction with adapters for 3/16" to 1/2" OD double flares and capacity to 5/8" single flares. Comes in a plastic case for storage.
| Item # | Material | Package Qty | |||
|---|---|---|---|---|---|
|
|
52740
|
Carbon Steel
|
1
|
Log in to view price |
Tube Bender
Tube bender for 1/4" to 3/8" tubing delivers full 360° bending capacity. Zinc die cast construction resists corrosion and provides durable performance for repeated use. Suitable for tubing forming and equipment maintenance, backed by a 90 day warranty.
| Item # | Material | Package Qty | |||
|---|---|---|---|---|---|
|
|
83738
|
Zinc Die Cast
|
1
|
Log in to view price |
Brake Line Tubing Straighteners
Handheld brake line tubing straighteners with precision rollers for 3/16" and 1/4" tubing. Works on steel, stainless steel, aluminum and copper tubing and removes bends and kinks for neater installation. Durable black finish and simple slide-through operation provides faster prep.
| Item # | Name | Package Qty | |||
|---|---|---|---|---|---|
|
|
837382
|
Brake Line Straightener for 1/4" Tubing
|
1
|
Log in to view price | |
|
|
837381
|
Brake Line Straightener for 3/16" Tubing
|
1
|
Log in to view price |
1 option | Item #:
841380
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
4 options | Item #:
841622
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
841403
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
3 options | Item #:
842402
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
3 options | Item #:
93883
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
54844
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
93885
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
T101A
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
50700
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
50760
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
52740
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
1 option | Item #:
83738
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
2 options | Item #:
837382
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Digital Catalog
View Catalog