Rebuild kits for the 2" mini angle grinder.

Typical Application: Air brake hose lines. Inner Tube: Synthetic EPDM. Reinforcement: One Polyester Braid. Cover: Synthetic EPDM. Temperature Range: -40 °F to 212 °F (-40 °C to 100 °C)

Durable metal wire helps prevent hydraulic hose from cuts and abrasion while allowing full flexibility and movement. Hot-dip galvanized steel provides exteneded service life in harsh environments.

Ideal for high-pressure hydraulic lines. MSHA accepted and suitable for marine applications. MSHA accepted and constructed with flame resistant vinyl nitrile. For use with Grip-Crimp Series Hose Ends.

Exceptional DURABILITY with lightweight, flexible POLYURETHANE construction. Up to 10 times the life of Nylon, PVC, or Polyethylene tubing. Superior ABRASION RESISTANCE and retains flexibility in subzero temperatures. Resists lubricating oils, grease, and a wide range of chemicals. Temperature range: -68°F to +160°F. NSF Approved for potable water. Ideal for pneumatic tools, instrumentation, and chemical transfer.

Durable Nylon 12 construction with polyester reinforcement (Type B) provides SUPERIOR ABRASION RESISTANCE against gasoline, diesel fuel, and road salts. Available in TYPE A (less than 5/16" OD) and TYPE B (over 5/16" OD) for various applications. Compatible with DOT Push-to-Connect and Compression-Style Fittings. Withstands temperatures from -49° to 221°F. Meets SAE J844 and DOT FMVSS 49 CFR 571.106 standards.

SILICONE RUBBER provides superior resistance to solvents, moisture, coolant additives, vibration, abrasion, and engine oil. Designed for an EXTENDED SERVICE LIFE of 500,000 miles or more under ideal conditions. EXTREME TEMPERATURE RATED, remaining flexible at -65°F and withstanding up to 350°F. EXTREMELY FLEXIBLE with a bend radius of just 5 times the inside diameter of the hose. Meets or exceeds SAE J20R3 Class A and TMC RP 303B Class 1, Grade 2. MADE IN THE U.S.A.

Exceptional durability and lightweight construction. Up to 10 times the life of nylon, PVC, or polyethylene tubing. The most abrasion resistant tubing available. Flexible even in subzero temperatures. Resists lubricating oils, grease, and a wide range of chemicals. Temperature range: -68°F to +160°F. NSF approved for potable water. Ideal for pneumatic tools and chemical transfer.

Dual reel combined extension cord and air hose reel provides a single mounting point for both services. Each reel operates independently for increased usability.

Ideal for connecting air brake tubing at a 45-degree angle in tight spaces. These brass fittings provide a full-flow design for optimal air efficiency and are DOT-approved for safety compliance. Use with Kimposite Air Brake or Synflex® Eclipse tubing. Ensure proper alignment during installation for best performance.

Reinforced, abrasion and weather resistant hose provides durability and flexibility, even in cold temperatures. Crush-resistant brass fittings provide increased durability and corrosion resistance.

The streamlined profile has no protruding bolt, which takes up less space and requires less clearance for installation, allowing for faster and easier assembly, disassembly, and installation; it can be installed with a socket, nut driver, or screwdriver, and is designed for flanged steel pipe connections, featuring all stainless steel construction.

Reliable piping connections without soldering or brazing. Suitable for water service, diluted acids, alkali solutions, and oil-free air. For use with ASTM B88, Types K, L, and M soft copper tubing in sizes 1/2" to 1". Body made of silicon bronze ASTM B584 alloy C87600, with EPDM O-Ring. Maximum temperature 250 °F.

QUICK CONNECT design allows for easy installation without tools. FULL-FLOW DESIGN offers up to 60% more flow area than conventional fittings. Constructed from BRASS, with pre-applied sealant on male threads. Suitable for use with Kimposite Air Brake or Synflex® Eclipse tubing. Specifications include working pressure up to 250 P.S.I. and temperature range of -20°F to 200°F.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

General purpose low, medium, and high pressure hydraulics. FOR USE WITH HOSE - H039, H104, H145, H145R, H180, H190, H245, H280, H290, H345, H350, H421, H425, H545 (-04 through -12 sizes only). Made from carbon steel - AISI/SAE 12L14 with zinc plating. "Bite-the-Wire" design offers higher operating and burst pressure.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

Zinc plated steel hose ends ideal for use in low pressure applications for air, water and oil. NPT Threads conform to ASME B1.20.1.

Designed for hydraulic applications, this female DIN swivel elbow ensures leak-free connections in high-pressure systems. Heavy 24° seat provides a secure seal, preventing fluid loss. Durable steel construction withstands vibration and temperature fluctuations. Apply suitable thread sealant and tighten to specified torque—check periodically for wear.