Exceptional DURABILITY with lightweight, flexible POLYURETHANE construction. Up to 10 times the life of Nylon, PVC, or Polyethylene tubing. Superior ABRASION RESISTANCE and retains flexibility in subzero temperatures. Resists lubricating oils, grease, and a wide range of chemicals. Temperature range: -68°F to +160°F. NSF Approved for potable water. Ideal for pneumatic tools, instrumentation, and chemical transfer.

SILICONE RUBBER provides superior resistance to solvents, moisture, coolant additives, vibration, abrasion, and engine oil. Designed for an EXTENDED SERVICE LIFE of 500,000 miles or more under ideal conditions. EXTREME TEMPERATURE RATED, remaining flexible at -65°F and withstanding up to 350°F. EXTREMELY FLEXIBLE with a bend radius of just 5 times the inside diameter of the hose. Meets or exceeds SAE J20R3 Class A and TMC RP 303B Class 1, Grade 2. MADE IN THE U.S.A.

The K100 Crimper provides 35 tons of crimping force and hose capacity up to 1" 2-wire and 3/4" 4-spiral hose. Open design ensures excellent operator visibility. Fully adjustable micrometer allows for precise crimping. LED crimp indicator prevents over crimping. Removable pusher and die cages facilitate accurate fitting placement. Base mounting holes enable bench or truck bed mounting. Easy carry handle enhances portability. Made in the U.S.A.

These pre-made hydraulic hose assemblies provide a fast way to replace failed hydraulic hoses when crimping equipment isn’t available. Each hose is assembled with the same style and size of fitting on both ends, and is available with male pipe rigid or SAE 37° (JIC) female swivel end connections. Built with 100R16 high-pressure hydraulic hose, they’re ideal for off-the-road construction equipment, farm equipment, and other demanding high-pressure applications. Made in the U.S.A.

Exceptional durability and lightweight construction. Up to 10 times the life of nylon, PVC, or polyethylene tubing. The most abrasion resistant tubing available. Flexible even in subzero temperatures. Resists lubricating oils, grease, and a wide range of chemicals. Temperature range: -68°F to +160°F. NSF approved for potable water. Ideal for pneumatic tools and chemical transfer.

These pre-made hydraulic hose assemblies provide a fast way to replace failed hydraulic hoses when crimping equipment isn’t available. Each hose is assembled with the same style and size of fitting on both ends, and is available with male pipe rigid or SAE 37° (JIC) female swivel end connections. Built with 100R16 high-pressure hydraulic hose, they’re ideal for off-the-road construction equipment, farm equipment, and other demanding high-pressure applications. Made in the U.S.A.

Dual reel combined extension cord and air hose reel provides a single mounting point for both services. Each reel operates independently for increased usability.

Reinforced, abrasion and weather resistant hose provides durability and flexibility, even in cold temperatures. Crush-resistant brass fittings provide increased durability and corrosion resistance.

K700 K-Series hydraulic crimper with 230V electric pump delivers 260 tons of crimping force for hoses up to 2" (2-wire, 4-spiral, and 6-spiral); front-load design aids insertion and alignment, fully adjustable micrometer supports precise crimps, and quick-change die tool plus built-in front die storage speed setup—foot switch keeps hands free, manual back stop supports repeat crimps, and base mounting holes allow bench mounting; made in the U.S.A.

Diamond hydraulic hose cutting saw blade is designed for quick, clean cuts on heavy 4- and 6-wire hydraulic hose with reduced debris; also cuts spiral, industrial, and metal hose—fits K-Series and many other hose saws including Clean-Cut®, Danfoss Power Solutions, Gates, Goodyear, Imperial Eastman, Parker®, Stratoflex, and Toledo.

This 1" drive compact impact gun delivers exceptional power in an inline, space-saving design for access where larger impact guns won’t fit. It provides 2,000 ft-lbs (±10%) working torque and 2,200 ft-lbs (±10%) maximum torque. Designed for comfort and control, it features a double-handed grip, a wide trigger, and a 45° adjustable air inlet to optimize hose routing and reduce interference during use. At just 15.84 lb, it’s significantly lighter than conventional 1" impacts to help reduce fatigue—especially during extended or overhead work. The trigger offers variable speed control plus three dial-actuated forward and reverse speed settings, and a 6" anvil helps reach hard-to-access areas without a separate extension. Factory rebuild/repair kits are available to help maintain OEM performance over time.

The streamlined profile has no protruding bolt, which takes up less space and requires less clearance for installation, allowing for faster and easier assembly, disassembly, and installation; it can be installed with a socket, nut driver, or screwdriver, and is designed for flanged steel pipe connections, featuring all stainless steel construction.

Mini pneumatic die grinders fit in the palm of the hand for excellent control and precision when grinding welds, removing stock, or finishing metals. 1/4" collet accepts common accessories including burs, flap wheels, deburring tools, wire brushes, Type R mount abrasives, and mounted points. Compact, lightweight design supports one-handed operation and helps reduce fatigue, with impressive power-to-weight performance for fast stock removal. Available in straight and right-angle styles for better access in tight areas.

Ideal for high-pressure hydraulic lines. MSHA accepted and suitable for marine applications. MSHA accepted and constructed with flame resistant vinyl nitrile. For use with Grip-Crimp Series Hose Ends.

These Kim-Clip A/C hose end repair nipples provide a cost-effective way to repair complicated or obsolete air conditioning hose ends/assemblies while maintaining factory routing. To use, cut the hose nipple off the existing fitting or tubing, braze on the repair nipple, then install Kim-Clip air conditioning hose. Steel construction.

Rebuild kits for the 2" mini angle grinder.

These rebuild/repair kits are designed for the 1” drive inline impact gun pneumatic impact gun to help maintain OEM performance over time. Kit options include a general maintenance kit (packing, blade, valve rod, springs, pins, seals, steel ball, and O-rings), a hammer kit (hammer and cage pins), a retaining ring kit (anvil collar and O-rings), and a 6" anvil kit (6" anvil, anvil collar, and O-rings).